OBD O is a positioning device, which can realize functions such as electronic fence, remote tracking, and overspeed alarm.
The terminal can meet the needs of relevant scenarios such as car monitoring, car hailing, and car rental.
The OBD O is 47x20x43mm in size, easy to install and fix.
The product has a built-in 60mAh rechargeable battery, and it can continue to send positioning data to the platform terminal after power off, dismantling the device can trigger functions such as disassemble alarm.
FEATURES
Name:
Technology:
OBD O
GSM/GPRS/GNSS
GNSS
GNSS:
Receiver:
Tracking sensitivity:
Accuracy:
Hot start:
Warm start:
Cold start:
GPS/Beidou/Glonass/Galileo
32 tracking channels
-148dBm
Navigation Tracking: -162dBm
<2m CEP
≤ 1s
≤2s
≤30s
CELLULAR
Technology:
2G bands:
Data transfer:
Data support:
GSM
Quad-band 850/900/1800/1900 MHz
GPRS Multi-Slot Class 12
GPRS Mobile Station Class B
Data supported
POWER
Input voltage range (mandatory):
Input voltage range (optional):
Back-up battery:
Power consumption:
12V DC from OBD connector
pin 16 and 4
9-36 VDC
60 mAh Li-Ion battery
At 12V < 15mA (online sleep)
At 12V < 50 mA (Tracking)
INTERFACE
Connector type (mandatory):
OBD2 interface:
Data Protocol Supported:
GNSS antenna:
Cellular antenna:
USB:
LED indication:
SIM:
Memory:
DTC Codes:
OBD2 standard connector (SAE J1962 and ISO 15031-3), a female OBD2 16-pin connector types A used for vehicles with 12V supply voltage
Standard OBD2 Interface (SAE J1962 and ISO15031-3)
ISO 15765 CAN (250kbit/sec or 500kbit/sec)
Internal High Gain
Internal High Gain
Debug USB
2 status LED lights ( blue-GPS,
yellow-GSM )
Micro-SIM
4MB
Planned for next release
ARCHITECTURE
Chip solution: MCU + RDA8955 module + GPS module + CAN
BLUETOOTH
Specification: Optional